Skip to content

Compatibility List

In our reference setup, it is possible to exchange individual components such as control units, energy management systems, or end devices and to verify their interoperability with each other. In doing so, we can implement both the direct control of a device and the control of multiple devices through an EMS. The GCPH can be controlled via IEC 61850, CLS.EEDI with MQTT or directly via control commands sent to the smart meter. These control commands can be executed using a simulated backend (Exceeding Solutions GmbH) as well as backends that operate in a real environment (BTC AG, Robotron Datenbank-Software GmbH, IVU Traffic Technologies AG, and PSI Software SE).

Col1Col2Col3Col5Col6Col7Col8Col9Col10
The following devices are permanently installed on our premises and can be freely exchanged within the test setups (additional devices available upon request):
GCPH
EMS
EMOB
HVAC
INV
DOMA
Gateway
Control Unit
Wallbox
Heating
Cooling
Solar
Battery
White Goods
PPC
Prolan
TQ Systems
MENNEKES
Vaillant
Theben + Theben MWM
GridX
Kostal
Daikin
PPC CLS-Gateway

The list of available testing options can be found under test conditions.

We recommend conducting the tests described in Module 2 only after the tests listed in Module 1 have been successfully completed. Inclusion in the compatibility list is achieved through a manufacturer’s declaration after successful completion of the tests in Module 1 and 2.